What is Radio Frequency Identification Used For

Not all RFID systems use the same radio frequency. RFID operates in several distinct bands, generally categorized as Low Frequency (LF), High Frequency (HF), and Ultra-High Frequency (UHF). Each frequency band has unique characteristics in terms of range, data speed, and ideal use cases. Understanding these differences is essential when selecting an RFID solution – using the wrong type could result in poor read performance or interference problems.

Below, we break down the vrste RFID-a and compare LF vs. HF vs. UHF:

• Niska frekvencija (LF) – Operates around 30–300 kHz (usually at 125 kHz or 134.2 kHz). LF RFID has the shortest read range, typically a few centimeters up to about 10 cm (4 inches). It uses lower-frequency radio waves that can penetrate most materials well, including water or body tissue, giving LF tags a low susceptibility to interference from water or metal. However, LF has a slower data transfer rate; generally, only one tag can be read at a time.
• Common applications of LF RFID include animal identification (e.g., pet microchips or livestock ear tags) and access control cards. For example, many building key fobs and older car immobilizer chips use LF RFID because it works reliably even when near metal or inside an animal’s body. The trade-off is the very short range – an LF tag must almost touch the reader’s antenna to be read.

• High Frequency (HF)—This covers 3–30 MHz, with RFID systems typically using 13.56 MHz. HF RFID offers a moderate read distance—usually up to ~30 cm (1 foot) for passive tags, though specialized setups can extend it close to 1 meter. HF tags communicate faster than LF and can use anti-collision protocols to read multiple tags (for instance, some HF readers can detect up to 20 tags in one operation).
• This frequency is widely used for smart cards, contactless payments (like credit cards and transit passes), electronic passports, and library book tracking. HF waves don’t mind moisture as much (they’re relatively insensitive to humidity and water​ ). Still, they do not perform as well directly on metal surfaces unless special tag designs are used. Thanks to global standards (ISO 15693, ISO/IEC 14443, and NFC protocols), this band is common in everyday life – every time you tap your phone or card to a reader, HF RFID is at work.
• Ultravisoke frekvencije (UHF) – Spans 300 MHz to 3 GHz, with passive UHF RFID systems using roughly 860–960 MHz. UHF RFID has the longest read range of the three and the fastest data transfer. Passive UHF tags can typically be read from 3 to 6 meters away (10–20 feet) under normal conditions, and with optimized equipment, this range can extend to 10+ meters in ideal cases.
• UHF’s higher-frequency radio waves enable very quick reading of many tags – a reader can scan hundreds of UHF tags per second in bulk, even if the tags are moving quickly on a conveyor. This makes UHF ideal for inventory management and supply chain operations.

The UHF band does have a downside: its waves are more easily blocked or detuned by metal and liquids. UHF signals tend to stumble around water and can be detuned by close proximity to metal surfaces. Still, with proper tag design (like adding insulating spacers or using on-metal tags), these challenges can be mitigated, and UHF remains the go-to for long-range tracking needs.

Common applications include retail inventory tags on products, pallet and case tracking in warehouses, toll collection tags on vehicle windshields, and large-scale asset tracking in yards or hospitals.
Each band has its strengths: LF and HF have shorter ranges but can work around water/metal better (using near-field coupling), whereas UHF achieves longer ranges and faster multi-tag reads but is more sensitive to the environment. Due to improvements and low cost, UHF is now the most widely adopted RFID class for new projects, while LF/HF remains vital for certain specialized tasks.